Freight Knowledge Center · Quoting
What information is needed to quote specialized freight?
Dimensions, weight, center of gravity, lift points, commodity and packaging, site access at both ends, loading method, dates and site restrictions. Give a provider those and the quote will hold; leave them out and it will change later.
4 min read · Freight Knowledge Center
Houston, TX · USDOT 1895894
The short answer
To quote specialized freight accurately, a provider needs dimensions, weight, center of gravity, lift and securement points, commodity and packaging, origin and destination access, loading and unloading method, required dates and any site or permit restrictions.
Missing items are the usual reason a quote changes after dispatch.
The ten-item quote checklist
Each item changes the equipment, the permits or the plan for getting the freight on and off the truck.
| Item | Why it matters |
|---|---|
| Length, width, height | Determines deck type and whether permits are required |
| Gross weight | Determines axle configuration and permitting |
| Weight distribution and center of gravity | Affects securement and legal axle loading |
| Lift points and rigging requirements | Determines how it gets on and off the truck |
| Commodity and packaging | Affects protection, tarping and handling |
| Origin access | Gate size, turning radius, overhead clearance, ground conditions |
| Destination access | Same as origin, plus who unloads and with what |
| Loading and unloading method | Crane, forklift, dock or drive-on |
| Required dates | Determines whether permits and routing are achievable |
| Site or plant restrictions | Appointment windows, PPE, orientation, escort rules |
The three items that get skipped most: access, lifting and timing
Dimensions and weight are almost always provided. Site access, lift method and realistic permit lead time are the ones that get assumed, and they are the three that cause a truck to sit or turn around.
If you are unsure about any of them, say so in the request. An open question at quote time is cheaper than a surprise at the gate.
Helpful extras for specialized freight
Not always required, but they speed up an accurate answer.
- Photos of the freight and how it is packaged
- Drawings or spec sheets with lift points marked
- Packing lists for multi-piece shipments
- Site contact who can confirm access and unloading
- Any plant or jobsite delivery rules in writing
- Which dimensions are measured and which are estimated
Questions
Related questions
What if I do not have exact dimensions?
Send what you have and say what is estimated. Estimated numbers are workable; wrong numbers presented as exact are not.
How long do permits take?
It varies by state and route. A provider should tell you the realistic lead time once they see the dimensions.
Do I need escorts?
It depends on the dimensions and the states involved. That is determined during routing.
Where this connects
- 01
Flatbed & heavy haul
Open-deck, step-deck and specialized equipment for freight that does not fit in a van.
Flatbed & heavy haul - 02
Project logistics
Multi-piece, multi-supplier moves planned around a site schedule.
Project logistics - 03
Packaging to final delivery
Crating, storage and transportation coordinated as one plan.
Packaging to delivery
Related
- ResourceIndustrial freight pricingThe inputs behind an industrial freight rate, common accessorials and how to avoid them, and how warehousing is priced.
- ResourceCritical delivery checklistA planning checklist for delivering critical equipment without downtime: constraints to document, the plan, execution and closeout.
- ServiceFlatbed & Heavy HaulPipe racks, skid packages, vessels, structural steel and rig equipment: the freight that damages easily, loads slowly and cannot be reworked if the trailer shows up wrong.
- ServiceProject LogisticsCapital equipment, shutdowns, multiple shipments and changing schedules coordinated on one operating plan — transportation, storage, handling, scheduling and communication around the move.
Need a truck now — or a logistics plan for what comes next?
Tell us what is moving, where it needs to go, when it needs to arrive and what constraints matter. Lightning will help identify the transportation and logistics plan that keeps the shipment, and the operation around it, moving.
